Metrosoft CM Trainings

 

Basic Training: Manual Geometry

Duration 3 days
Participants 1 to 3 persons
Requirements AUKOM level 1 or basics of metrology and PC operation under Windows
Objective Introduction in Metrosoft QUARTIS using CNC controlled measuring machines in order to measure geometrical work pieces and create measurement reports independently
Subjects
  • Structure of the user interface
  • Create reference sphere and calibrate styli / probe systems
  • Operation of the used manual rotate and swivel head from Renishaw
  • Measurement of all geometrical elements
  • Geomtrical graphics (contents and operation of the 3D graphic window)
  • Element graphics, range trend diagram, point distribution
  • Processing of measured or calculated elements
  • Define and save coordinate systems
  • Determine and tolerate features according to DIN, ISO and ASME norms
  • Create and print tabular or graphical reports
  • Create, correct, print and interpret part inspection programs
  • Use of the integradted context sensitive help (CM Help)
  • Basic database knowledge

Basic Training: Geometry CNC

Duration 4 days (+1 day with scanning probe systems)
Participants 1 to 3 persons
Requirements Basics of metrology and PC operation under Windows
Objective Introduction in Metrosoft QUARTIS using CNC controlled measuring machines in order to measure geometrical work pieces and create measurement reports independently
Subjects As basic training: Manual geometry, additionally:
  • Automatisms with the measurement of elements
  • All CNC functions with error handling
  • Creating part inspection programs with CNC
  • Operation of the used motorized rotate and swivel head
  • Operation and calibration of the automatic stylus changing systems used by the customer
  • Operation and calibration of the probe systems used by the customer

Advanced Training Geometry

Duration 2 days
Participants 1 to 3 persons
Requirements Basic Training: Manual Geometry or Basic Training: Geometry CNC
Objective Detailed knowledge of Metrosoft CM to ensure the use of this high performance software using all its possibilities and potential.
Subjects
  • Extended database func tions (sort, filter, edit, query, print, export, synchronize linkages)
  • Working with several measurement databases nad/or system databases
  • Optimize of part inspection programs
  • Part inspection programs with subprograms and loops
  • Part inspection programs with conditional und uncondiotional jumps
  • Morroring of part inspection programs
  • Create, insert and use images for graphical user guidance
  • Define quick selection table and isnert images
  • Define passwords, different user levels
  • Element filter functions (filter methods median and low pass
    • )
  • Solving customer specific measurement tasks
Metrosoft CM-STAT (Statistics)
  • Selection and settings of statistical diagrams
  • Statistic evaluation of features, interpretation of diagrams
  • Use of actual value filters
  • Diagram settings
  • Print statistics diagrams
  • Machine capability Cm/Cmk
  • Export of features with actual value in different data formats
  • Export of features into Q-DAS ASCII Transfer Format
  • Inspection Reporting (ASCII or Excel Format)
Metrosoft CM-SPC (Statistical Process Control, zu CM-STAT)
  • Definition of sampling
  • Definition, output and interpretation of process control cards (X cross, R and S card)
  • Process Capability Cp/Cpk, Pp/Ppk
Metrosoft CM-EXEL (Extended Elements)
  • Measurement and evlauation of surface points, rectangle and slot
  • Nimonal/actual comparison of surface points
  • Define and use theoretical elements
  • Calculation method circle (least squares, minimum curcumscribed and maximum inscribed)
Metrosoft CM-EXCO (Extended Coordinates)
  • Alignment with up to 6 points in grid coordinates (RPS)
  • Offset plane and offset line
Metrosoft CM-EXFE (External Features)
  • Definition of user specific features
  • Creation of initial sample reports
Metrosoft CM-1DMV (1 Dimensional Measurement Value, zu CM-EXFE)
  • Connection and configuration of external measuring devices
  • Definition of user specific features with online adoption of nominal data
Metrosoft CM-ROT (Rotary Table)
  • Connection, configuration and operation of a manual, semi-automatic or automatic rotary table
  • Definition of rotary table coordinate systems

Basic Training: Surfaces and profiles with CAD nominal data (SURF)

Duration 3 days
Participants 1 to 3 Persone
Requirements Experience in metrology with Metrosoft CM.
Objective Practical introduction into the surface functions of Metrosoft CM and the ability to carry out measurements of CAD surfaces and to interpret reports.
Subjects Metrosoft CM-SURF (Surface Measurement)
  • Import of surface date (CAD model) in different CAD formats
  • Loading of additional CAD Files and/or Help Files
  • Saving selected elements as new ACIS files
  • Grouped CAD File Conversion
  • Use of the 3-D Graphic window (CAD Functionality)
  • Layer management for CAD-Model
  • Create circle, rectangle, slot on a CAD model
  • Mirror surface data
  • Graphical analysis functions
  • Take over geometric elements into the actual surface
  • Mesasure free form surfaces with an on-line nominal/actual comparison
  • Click and Measure Function on CAD-Model, including collision detection
  • Measurement attribute over user format files from CAD-Files overwirte and/or direct Input to Free Form element
  • Graphical and numeric recording with individual legends
  • Design of paper layouts with several views/displays
  • Surface specific database functions
Metrosoft CM-COFF (Coordinate System Free Form, zu CM-SURF)
  • Coarse alignment with point to point Bestfit
  • Surface Bestfit with different variations:
    Restrict degrees of freedemom (translations and rotation)
    Consider tolaernces/deviations, define max. correction
    Single coordinate Bestfit: minimize point deviation, set to zero or not consider
Metrosoft CM-BORD (Border Measurement, zu CM-SURF)
  • Measurement of edge points either rectangular or at any angle in relation to the reference surface
  • Measure intersection curves on free form surfaces
  • Measure offset curves on free form surfaces
  • Evaluation of the A/B deviation (spring-up / length deviation)
Metrosoft CM-CURVE (Curve Measurement, zu CM-SURF)
  • Calculate plane and cylinder intersections on CAD model
  • Measure free form curves with online nominla/actual comparison
  • Grpahical display of free form curves and tolerance bands
  • Reporting of free form surfaces

Basic Training: Surfaces and profiles defined thru points (BAFF)

Duration 1 day
Participants 1 to 3 Persone
Requirements Experience in metrology with Metrosoft CM Geometry.
Objective Practical introduction into the point based surface functions of Metrosoft CM to be able to carry out measurements and interpret reports on your own
Subjects
  • Measurement of unknown plane curves, gird curves and form curves
  • Kink, Interrupt, and close curve insertion
  • Create nominal element out of actual element
  • Measure actual element with nominal/actual comparison online
  • Create feature "nominal/actual comparison" and "line form"
  • Extract circles and lines out of plane curves and actual curves
  • Measurement of point surfaces
  • Graphical and numerical reporting with individual legends
  • Creation of report templates with one or several views
  • Import points from profiles and point surfaces into part inspection program (measurement according to specifications)
Metrosoft CM-VDA1 (Verband Deutscher Automobilhersteller)
  • Import and export of point and element data in VDA-FS format

Basic Training: Offline programming with Metrosoft CM-GRIPS

Duration 2 days
Participants 1 to 3 Persone
Requirements Experience in metrology with Metrosoft CM Geometry
Objective ractical introduction in the offline programming with Metrosoft CM
Subjects
  • Import of surface data (CAD model) in different CAD formats
  • Adding furter CAD files and/or auxiliary files
  • Save selected elements as new ACIS file
  • Operation of the 3D graphics window (CAD functionality)
  • Layer management for CAD model
  • Link nominal data with geomtetrical graphics
  • Interactively create geometrical elements with point distribution
  • Create probe systems offline
  • Interactively add and/or edit probe and intermediate points
  • Offline program sequence with visual display

Special Training

Duration According to time or arrangement
Participants 1 to 3 Persone
Requirements Experience in metrology with Metrosoft CM
Objective Customized customer training and support
Subjects Examples
  • Analysis of measurement tasks
  • Creating of part inspection programs
  • Optimization of programs with user
  • Task related probing startegies
  • Interpretation of reports and data
  • Installation and training of new software modules
  • Update traininng for a new Metrosoft CM version
Metrosoft CM-DMIS (IMP, EXP, DMO, DIP)
  • Basics of DMIS 4.0 programming language
  • Import of DMIS measuring programs with/without conversion into CM format
  • Export of CM part inspection programs into the DMIS format
  • Export of measurement results into the DMO format
  • DMIS Interpreter (DIP) for direct execution of DMIS programs
Metrosoft CM-GFIT (Geometrical Bestfit)
  • 3D Bestfit for optimizes coordinate system out of points from geometrical elements
Metrosoft CM-SQL (SQL Server Database)
  • Setup and operate CM SQL Manager
Metrosoft CM Q-DAS Import Export
  • Export of feature data for staistical purposes
  • Creation and setup of key files
  • Export data and format of the Q-DAS standard

Contact

WENZEL Metromec AG
Rheinfelsstrasse 1
CH-7007 Chur
Tel: +41 81 257 07 00
Fax +41 81 257 07 01
This email address is being protected from spambots. You need JavaScript enabled to view it. DirectionsSBB Time TableWENZEL Metromec AG

Quick Links